Product information
Brushes
Royal BrushGeneral-purpose FRP application brush available in 1", 1.5", 2", 2.5", 3", and 4" variants, suitable for applying resin, gelcoat, and compatible coatings.
Get quotationAbout this product
The FRP Application Brush is a general-purpose manual application brush designed for composite and surface-finishing work. It is suitable for applying liquid polyester resin, epoxy resin, gelcoat, release products, and compatible coatings during FRP manufacturing, repair, and finishing operations. Available in multiple sizes—1 inch, 1.5 inch, 2 inch, 2.5 inch, 3 inch, and 4 inch—allowing selection based on the required application area and resin-handling requirement. Exact bristle material and solvent resistance should be confirmed for the supplied brush.
Applications
FRP hand lay-up; resin application; gelcoat application; wet-out of glass fiber; mold preparation; composite repair; coating work; surface finishing; general workshop applications
Key features
Available in 1", 1.5", 2", 2.5", 3", and 4" sizes; simple manual application; suitable for wet-out and surface coating; economical workshop consumable; multiple widths for different application areas
Recommended use
Use with compatible resin, gelcoat, release agent, or coating. Clean or dispose of the brush according to the chemical used and applicable manufacturer recommendations.
Not recommended for
Not recommended for applications requiring a certified specialty brush or prolonged immersion in aggressive solvents unless brush compatibility has been confirmed.
Handling and safety
Use appropriate PPE and ensure adequate ventilation. Follow the current manufacturer TDS/SDS for the resin, gelcoat, coating, or chemical being used. Keep chemical containers closed and away from incompatible materials and ignition sources where applicable.