Product information
ACRALOCK SA10 Series
A structural adhesive is a high-strength, load-bearing adhesive typically defined as having a lap shear strength greater than 1,450 psi (10 MPa), capable of joining similar or dissimilar materials while withstanding heavy forces over time.
Get quotationTechnical documents
- Loading thumbnail…
Technical data sheet · 2 pages
Acralock SA10 05A SA10 10A SA10 20A Structural Adhesive Preliminary Technical Data Sheet (TDS) v24 05
Extracted first-page text identifies this PDF as a technical data sheet.
Revision 7.3-009
About this product
ACRALOCK SA10-05A, SA10-10A, and SA10-20A are three similar base methacrylate adhesives (Component A) that only differ by working time ranges. Formulated for use with an activator (Component B) and mixed at a 10:1 ratio. The SA10-05A is used for 5 minutes, and the SA10-10A for 10 minutes, using ACT-1B. SA10-20A can be used with faster or slower activators: ACT-1B, ACT-2B, or ACT-3B to provide working time options from 15 to 30 minutes. These products are designed with low boiling tendencies and high strength to adhere to assemblies of thermoset composites and plastics and are formulated to be primerless on most metal surfaces.
Verified specifications
Available in 5, 10, 20, 30, 35, 40, 45, 60, 75, 100, 120, and 190-minute working times. Sizes: 50 ml, 490 ml, 825 ml. Colors: off-white, grey, black.
Applications
Polymer to metals; Polymers to polymers;
Key features
Easy 10:1 mix ratio 3000 psi shear strength and up to 120% elongation Little to no surface preparation Primerless on most metals Good chemical resistance Excellent fatigue characteristics and shock load resistance Stable formulations with a shelf life of 6 months for BLK/GRY and 9 months for OWT
Recommended use
Fixed attachments, structural joints, FRP parts, polymer gaskets, electronics assembly, non removable enclosures.
Not recommended for
Does not work with polyolefins like PE, HDPE, LDPE, PP etc.,